CP761 is an acrylic polymer emulsion that offers an alternative method to the Novabond slurry method of surfacing bare concrete.

When used over clean concrete, CP-761 will improve the adhesion of acrylic coatings to concrete. Allow CP761 to dry completely before next application of Novacrylic surface system.

NEW CONCRETE MUST HAVE:

• 15 MIL POLYOLEFIN VAPOR BARRIER UNDER THE CONCRETE BASE
• MEDIUM BROOM FINISH
• CONTAIN NO CURING AGENTS
• MUST CURE A MINIMUM OF 30 DAYS
• ETCHED WITH A PHOSPHORIC ACID WASH
• BE PREPARED AS INSTRUCTED ON PAGE 6 OF OUR GUIDE TO QUALITY SPORT SURFACES
• “PERPARATION CONCRETE”

Minimum application temperature is 50F and rising.

Application is with either roller, neoprene rubber squeegee or spray.

*According to standards in place at the time this document was created, this product is rated non-hazardous